SeaLand HTS-Basic series (with fittings only) - Manual (Page 2)

2
Dometic Corporation reserves the right to change specifications without notice.
HTS Benefits
Table of Contents
SeaLand HTS Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Winterizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
HTS Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Plumbing Fittings, Hose and Pipe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Superior Durability: SeaLand ® holding tank systems (HTS) are molded from linear low density polyethylene (LLDP) resin.
Polyethylene is best-suited for holding tank construction because of its resistance to corrosion and odor permeation, and it will last
longer than the life of a typical fiberglass hull.
Leak-Proof Design: All hose connections in SeaLand holding tanks are on the top of the tank, eliminating possibility of leakage
due to a faulty connection below the liquid level of the tank contents. Our unique diptube design reduces the risk of plugging while
keeping the residual contents in the tank to a minimum.
ISO/USCG Compliant: SeaLand HTS models are fully compliant with the ISO 8099:2000(E) standard and applicable requirements
of the United States Coast Guard for pleasure craft installation.
Odor-Free Design: SeaLand tanks have extra-heavy wall thickness to prevent odor permeation. Holding tank systems can be fitted
with a SaniGard™ in-line vent filter that stops unpleasant odors from escaping through the holding tank vent.
Implosion Protection: SeaLand holding tanks are equipped with a TankSaver™ vacuum relief valve which prevents damage from
dockside pumps that operate at very high levels of vacuum. The TankSaver valve opens automatically under vacuum conditions, but
remains sealed regardless of shock-loading or vibration.
Multiple Tank Outlets: Most HTS models are equipped with two discharge outlets. One is for connection to a deck-mounted
discharge fitting and one is for connection to an overboard discharge pump.
HTS Components: Every HTS is built with high-quality SeaLand sanitation system components. See page 6 for details.
SeaLand Diptube
Discharge Outlet
Typical
Discharge Outlet
amount of residual effluent
amount of residual effluent
HTS with Vacuum Generator, Discharge Pump HTS with Basic Fittings
HOLDING TANK
HOLDING TANK SEACOCK
SEACOCK
VENT FITTING
VENT FITTING
VENT FILTER
VENT FILTER
DISCHARGE
PUMP
DISCHARGE
PUMP
DECK
DISCHARGE
TANK
MONITOR
TANK
MONITOR
DECK
DISCHARGE