SeaLand VHT 4500 Holding Tank - 140 Series VacuFlush Toilet - Manual (Page 10)

10
PRoPER boWl clEaninG
To maintain the toilet’s original, lustrous appearance, use
SeaLand ® Toilet Bowl Cleaner or other non-abrasive
bathroom and toilet bowl cleaners. Follow label directions.
Caution
To avoid damaging the toilet system’s seals and
valves, do not clean toilet with abrasive cleaners,
caustic chemicals, or lubricants and cleaners
that contain alcohols or petroleum distillates.
holDinG TanK PuMP-ouT oPERaTion
noTE: Before pumping out holding tank, turn off
water supply to toilet and electrical power to vacuum
pump. Follow steps below to assure thorough tank
discharge.
1. a. Press down fully on
Pedal, then b. press lock.
2. Slowly bring Pedal up while holding Lock down
against Pedal until Pedal stops. The Lock prevents
the flush ball inside the toilet bowl from closing
completely.
3. Pump out holding tank.
4. After pump-out is complete, press down on Pedal
fully, then release to close flush ball.