Operation, 6 operation – SeaLand 9400 Series RushFlush Operation Manual User Manual

Page 7

Advertising
background image

7

SeaLand 9300-9400 Series RushFlush Toilets

Operation

6.1

Toilet system start-up

1 . Turn on water supply and electrical power to toilet .
2 . Press “Flush” handle or switch (fig .

5

2) once .

3 . Toss several sheets of toilet paper into bowl and

repeat cycle . The bowl should completely clear .

4 . If tissue paper does not completely discharge from

toilet bowl, flow times for the rim and lower water jets
may need to be increased . (See fig .

3

5, page 2, for

location of control module in back of toilet .)

On water flow control module, (fig .

6

), adjust water

flow times to higher setting . Repeat flush test after
each adjustment to assure tissue paper discharges
from toilet bowl .

6 Operation

5

6

1

2

4

3

FLUSH

ADD WATER TO BOWL

6.2.1 Normal toilet operation -

flush handle and status panel (9300 series)

ADDING WATER TO TOILET BOWL
Lift flush handle until desired water level is achieved . (Water flow will
shut off automatically if switch is pressed too long to avoid overflow .)

FLUSHING TOILET
Press flush handle down, then release it . This activates a powerful water
jet action that breaks up and discharges effluent from the bowl, through
the discharge loop and to the holding tank .

Caution – Do Not Flush Foreign Objects!
Flush only water, bodily wastes and rapid-dissolving toilet
tissue . Do not flush wet wipes, sanitary napkins, condoms,
diapers, paper cups, cotton swabs, food, hair or liquids such
as oils or solvents as clogging or damage to the toilet or toilet
system may occur .

Note
Make sure all guests understand toilet operation before use .

1

6.2.2 Toilet system status panel (optional)

“3/4-FULL” and “FULL” TANK INDICATOR
The SeaLand toilet system status panel (DSS) includes a bi-color light
(fig .

7

1) to indicate holding tank status . When it glows yellow, the

waste tank 3/4-full . When it glows red, the tank is full and electrical
power to the toilet shuts off to prevent overfilling the holding tank .
After the tank is emptied, the red light turns off and electrical power to
the toilet is restored .

7

Advertising
This manual is related to the following products: