Casio LK70S - Manual (Page 45)

E-43
SmartMedia Card Error Messages
Display Message Cause Action
Er Card R/W
Er No Card
Er Format
Er Protect
Er SizeOver
Er WrongDat
Er Not SMF0
Er No File
There is something wrong with the card.
(1) The card is not set correctly in the card slot.
(2) There is no card in the card slot or the card
was removed part way through a card
operation.
(1) The format of the card is not compatible
with this keyboard.
(2) The card is damaged.
The card is write protected.
The SMF you are trying to read is too large.
The SMF data is corrupted or the wrong
format.
You are attempting to play SMF data that is
not Format 0.
You are trying to read data from a card that
does not contain any SMF data that is
supported by this keyboard.
Use a different card.
(1) Remove the card and reinsert it correctly
(page E-41).
(2) Insert a card into the card slot. Never
remove a card from the card slot while a
card access operation is in progress.
(1) Change to a card that has the proper format.
................................................................. E-41
(2) Use a different card.
• Use a different card.
• Remove the card’s write protect sticker to
enable data storage. .............................. E-40
Press the CARD button to return to the SMF
data selection screen, and then select different
SMF data that is smaller than the file you are
trying to read (page E-42).
Use different data.
Use only Format 0 SMF data.
Load a card that contains SMF data that is
supported by this keyboard.
Using a SmartMedia Card
653A-E-045A
LK70S_e_32-44.p65 04.8.18, 11:04 AM 43