Seville Classics UHD20242 - Manual (Page 12)

Step 15.
Once all the drawer panels are aligned, tighten
all the drawer screws.
Drawer Body (#26-2).
Install Small Drawer Front (#26-1) to Small
3. Slide Left and Right Drawer Panle into into
(#26-1) Small Drawer Front as detail picture
shown, use 5pcs (#15) Screw B to tighten.
2. After fold up each panels of (#26-2) Small
Drawer Body, use (#15) Screw B to tighten the
back panel to the Left and right panel.
UltraHD Rolling Workbench Cabinet (Model No. 20242)
(pg 11 of 14)
1. Fold (#26-2) Small Drawer Body left Panel and
right panel, and back panel up.
Note: Do not tighten the screws all the way, until
part 3 is completed.
#26-2
#26-2
#15
#26-1
#15