Seville Classics UHD20242 - Manual (Page 13)

Step 16.
Note: Pull out the ball bearing
track completely before you
attach drawer.
UltraHD Rolling Workbench Cabinet (Model No. 20242)
(pg 12 of 14)
Place the Drawers.
1.
Pull out the sliders completely, then put the
drawer to the sliders, make sure the square
holes on the drawer side panels are line up, and
the drawer is hook on the sliders completely.
2. Use 4pcs (#15) Screw B to tigthen the drawer,
and put (#24) Drawer Mat into the drawer.
Repeat above steps to place other drawers.
Note: Do not tighten any screws completely
until all the drawers are adjusted well.
Hook cutaway view