Shellab SCO2W-2 - Manual (Page 3)

3
RECEIVING AND INSPECTION
IMPORTANT: READ THIS INSTRUCTION MANUAL IMMEDIATELY!
Your satisfaction and safety require a complete understanding of this unit, including its
proper function and operational characteristics. Be sure operators are given adequate
training before attempting to put the unit in service. NOTE: This equipment must be used
only for its intended application; any alterations or modifications will void your warranty.
1.1 Inspection: The carrier, when accepting shipment, also accepts responsibility for safe delivery and
is liable for loss or damage claims. On delivery, inspect for visible exterior damage, note and
describe on the freight bill any damage found and enter your claim on the form supplied by the
carrier.
1.2 Inspect for concealed loss or damage on the unit itself, both interior and exterior. If any, the carrier
will arrange for official inspection to substantiate your claim. Save the shipping crate until you are
sure the unit has been delivered in good condition.
1.3 Return Shipment: If for any reason you must return the unit, contact your customer service
representative for authorization and supply nameplate data. For information on where to contact
Customer Service please see the manual cover.
1.4 Accessories: Make sure that all of the equipment indicated on the packing slip is included with the
unit. Carefully check all packaging before discarding. Each chamber comes equipped with 3
shelves, 4 shelf standards, 1 humidity pan and a power cord. All units are shipped with 4 leveling
feet and supply hose kit.
Section
1