Shellab SRI3-2 - Manual (Page 3)

3
RECEIVING AND INSPECTION
Your satisfaction and safety require a complete understanding of this unit. Read
the instructions thoroughly and be sure all operators are given adequate training
before attempting to put the unit in service. NOTE: This equipment must be used
only for its intended application; any alterations or modifications will void your
warranty.
1.1 Inspection: The carrier, when accepting shipment, also accepts responsibility
for safe delivery and is liable for loss or damage. On delivery, inspect for visible
exterior damage, note and describe on the freight bill any damage found, and
enter your claim on the form supplied by the carrier.
1.2 Inspect for concealed loss or damage on the unit itself, both interior and exterior.
If necessary, the carrier will arrange for official inspection to substantiate your
claim.
1.3 Return Shipment: Save the shipping crate until you are sure all is well. If for
any reason you must return the unit, first contact your customer representative
for authorization. Supply nameplate data, including model number and serial
number. Please see the manual cover for information on where to contact
Customer service.
1.4 Accessories: Verify that all of the equipment indicated on the packing slip is
included with the unit. Carefully check all packaging before discarding. This unit
is equipped with 2 shelves and a humidity pan/
WARNING: Never use this unit for the growth, cultivation, incubation or storage
of fruit flies (drosophila melanogaster). This unit is not designed for use with
fruit flies. Improper use of this unit, including use with fruit flies, will void any
warranty. Other units are specifically manufactured for fruit fly application, and
you should consult your dealer or the manufacturer in order to identify another
model suitable for your application.
Section
1