SIG SAUER SP2009 - Manual (Page 11)

11
Field Stripping
Before you take the pistol apart, make sure it's unloaded .
This is essential for your safety and the safety of others.
Field strip the pistol as follows:
Figure A
Press the magazine catch.
Remove the magazine.
Figure B
Pull back the slide (4) as far as it will go and hold it in the open position by
pushing up the slide catch lever (17) with your thumb.
Check carefully to ensure that the chamber is empty and the magazine well
is clear (see below).
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:53 AM Page 11