SIG SAUER SP2009 - Manual (Page 12)

12
Figure C
Take frame and slide in your right hand.
Pull slide (4) back slightly to release slide catch lever (17).
Allow slide to move forward slightly (about 1/8”) until the slide recess notch
lines up with the tab on the slide catch lever (4b).
Using your left hand, press on the slide catch lever shaft from the right side
of the pistol and remove the slide catch lever from the left side of the pistol.
Figure D
Hold the slide firmly and allow it to move forward slowly.
Now slip the complete assembly, comprising slide (4), barrel (1), recoil spring (3)
and guide (2), forward and off the frame.
OM-SIGPRO-USA 6-2005.qxp 6/1/2005 8:53 AM Page 12