SIG SAUER SIG516 Rifle - Manual (Page 79)

when it counts ™
www.sigsauer.com 79
2. Begin to thread the gas valve into the gas block clockwise; and
FIG 55 Gas valve rotatIon FIG 56 FInal Gas valve PosItIon
depress the valve plunger and continue to screw the gas valve into the gas block until the valve is flush up against the gas
block. Back out the gas valve no more than one (1) turn releasing the valve plunger to the desired setting.
alWayS PerforM a funcTion cHecK of THe rifle anyTiMe you field STriP iT for cleaning or MainTenance.
folloW THe STePS BeloW. SHould THe rifle noT PaSS THeSe SiMPle STePS do noT aTTeMPT To fire THe rifle,
and conTacT Sig Sauer or an auTHoriZed SerVice TecHnician.