Warning, 0 ready to fire, 1 firing – SIG SAUER SIG522 Rifle User Manual

Page 17

Advertising
background image

32

www.sigsauer.com

www.sigsauer.com

33

when it counts

waRning

always make sure the muzzle is pointed in a safe direction! never attempt to load or unload
any firearm inside a vehicle, building, or other confined space (except a properly constructed
shooting range). enclosed areas frequently offer no completely safe direction to point the
firearm; if an accidental discharge occurs, there is great risk of bodily injury or property
damage. Before loading, always clean all grease and oil from the bore and chamber, and
check to be certain that no obstruction is in the barrel. any foreign matter in the barrel could
result in a bulged or burst barrel or other damage to the firearm, and could cause serious
injury to the shooter or to others.

4.0 Ready to fire

The rifle is in a “ready to fire” condition when the bolt is fully forward, the hammer is
cocked, and there is ammunition in the chamber.

4.1 firing

1. Move the safety lever to the “f” (fire) position.
2. depress the trigger, firing a single round in the semi-automatic mode.
3. continue until firing is complete.
4. Move the safety lever to the “S” (Safe) position
5. See Section 5.0 unloading The rifle

waRning

dO NOt tOUCh thE tRIggER UNtIL YOU ARE

ACtUALLY REAdY tO FIRE thE PIStOL.

Step 1

Step 2

Advertising