Primary visoralarm waiting for signals, Primary visoralarm xx signals pending – SilentKnight VisorAlarm Plus 2U Operating Instructions User Manual
Page 15
VisorALARM PLUS 2U Operating
III - 8
Doc.DM375-I
Ver.1.0
5xx
Dis/Byp
6xx
Test
Others
Other
If the „ key is pressed, extended info is shown in the display:
where the date is shown in MM/DD/YY format.
The previous view can be selected by pressing the ƒ key.
In order to acknowledge a signal the user must press the ACK key again.
If there are more pending signals the receiver shows the following:
And the user must press the ACK again in order to visualize the highest priority signal.
When there are no more pending signals the receiver returns to its idle state displaying a status line
indicating that it is waiting for new signals.
PRIMARY VisorALARM
Waiting for signals
PRIMARY VisorALARM
xx Signals pending
« 11/17/06 16:33:23
00001234 E110 01 001