Solvline LemonIDE Ver 1.0e - Manual (Page 45)

LemonIDE TM User’s Guide
6.4.2 Setting Tracepoints & Actions
Register a new Tracepoint.
Left click on the source code to be registered as a
Tracepoint and click “Toggle Tracepoint”. A properties
window where actions for the tracepoint can be set will
appear.
Pass count, registers, local variables, arguments can be selected
as desired in “Tracepoint Properties”
Click “OK” and a green trace point will appear.
Pass Count Non-Breaking Debugging will stop when the line is executed this number of times.
6-21