Solvline PB2xxxUG - Manual (Page 16)

4
Configuration via Web
Each Portbase has its own web page in it, and helps you set the operational configuration appropriate to
each individual environment.
The web page for the configuration consists of:
Network Configuration
Serial port Setting
Firmware
Update
1. Getting started
1) Set IP address of Portbase first, if you have not set it yet (See Chapter 2 Configuration.)
2) Enter the Web page of Portbase thru browser by IP address.
3) Enter the password, If the initial window as shown below appears.
Password is initially set to '9999'.
Please, try to connect thru serial port, if you forget password.
4) Click “LOGIN” and start Operational Environment Setting.
16