Solvline Eddy DK - Manual (Page 113)

Eddy DK Programmer Guide
113
6.7 GPIO Functions
GPIO functions control up to 56 GPIO ports provided by Eddy-CPU, 34 GPIO ports provided by Eddy-S4M
They can spot 3.3V power or control writes with individual GPIO port.
Pins provided by Eddy CPU/S4M are public pins that can be used to control other devices and are not used solely
for GPIO.
Eddy CPU/S4M provides 32 signal lines as 3 port groups; Port A, B, C.
Each port in Port A, B, C can be configured to be used as device or GPIO. They can be configured in Web.
Please refer to sample source ‘
testdk.c ’ in Eddy_Apps folder for precise usage.
Eddy-CPU GPIO Table
The Yellow parts can all be used as GPIO ports if they are not used as devices.
Section Description Number of Ports
S0 ~ S3 Serial Port 1 ~ 4 20
Debug Debug Port 2
Reset Reset 1
Rdy Ready LED 1
ADC Analog Digital Converter 4
LAN LAN Port 2
EEPROM SPI (EEPROM) 4
NAND NAND Flash 2
KEY Key Pad 8
* GPIO & User Peripheral 12