Sonics VC5040PB - Manual (Page 7)

4
SECTION III –
USING THE ULTRASONIC PROCESSOR
1. Depress the ON/OFF switch to energize the unit. The switch will illuminate.
2. Rotate the AMPLITUDE control as required.
3. If a footswitch or remote actuation device is used, depress the ON/OFF switch to
turn the ultrasonics off, plug in the footswitch or remote actuation device into the
footswitch jack, and depress the ON/OFF switch again to turn the ultrasonics
back on. Depressing the footswitch, or closing the contact on the remote
actuation device connected to the footswitch jack, will energize the ultrasonics.
CAUTION
1. Do not operate the ultrasonic power supply unless it is connected to
the converter
2. High voltage is present in the power supply - do not operate with the
cover removed.