Sonics VC50 AT (1990) User Manual
Page 2
2
READ BEFORE INSTALLING OR
USING THE EQUIPMENT
Your Ultrasonic Atomizer has been designed with safety in mind. However, no design
can completely protect against improper usage, which may result in bodily injury and/or
equipment damage. Please observe the following warnings at all times, read the operating
instructions carefully before operating the equipment, and retain this instruction manual
for future reference. If the Ultrasonic Atomizer is used in a manner contrary to that
specified in this instruction manual, the protection features designed into the unit may be
impaired.
W
hen mounting the probe, always clamp the upper portion of the converter housing.
Never clamp the probe.
M
ake sure the Ultrasonic Atomizer is properly grounded via a 3-prong outlet.
H
igh voltage is present in the power supply. Do not remove the cover. Refer all servicing
to qualified service personnel.
T
o avoid electric shock, disconnect the electrical power cord before removing the cover
prior to servicing.
N
ever operate the power supply unless it is connected to the converter.
N
ever secure anything to the probe, except at the nodal point (point of no activity).
N
ever touch a vibrating probe.
N
ever allow a microtip to vibrate in air for more than 10 seconds.
I
t is recommended that a sound abating enclosure or ear protection be used when
operating the Ultrasonic Atomizer.
WARNING or CAUTION
Where you see this alert symbol and WARNING or
CAUTION heading, strictly follow the warning instructions
to avoid personal injury or equipment failure.