Sonics GXT - Manual (Page 18)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
I N S T R U C T I O N M A N U A L • M O D E L G X T P O W E R S U P P LY
17
OPERATIONAL FEATURES
– Adjustable Afterburst Timer to separate parts from horn.
– Adjustable tolerance limits in time (sec) with visual alarms.
– Information displays including: number of assemblies, number of rejects,
and number of cycles.
– Fault displays.
– Keypad security.
– Self-diagnostic input test.
– Storage capabilities of up to 15 jobs.
– RS-232 Printer monitor interface permits connection to a printer or
computer.
– External job selection when the keyboard is “locked.”
STARTING UP THE POWER SUPPLY
Press the ON/OFF key to turn the power supply on. The LCD screen will
briefly display “Start Sequence” and show wattage and fre q u e n c y
information. Then the LCD screen will show the following “ready” display:
This display shows the last weld information for weld time and power. (After
power down and subsequent power up, values are cleared to zero.)
00.00 sec 00 %Pmax
Go To Top Of Document