Sonics GXT - Manual (Page 36)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
I N S T R U C T I O N M A N U A L • M O D E L G X T P O W E R S U P P LY
34
Go To Top Of Document
Speed Consideration: If ultimate speed is more important to an application
or the system is not using the print line output, it may be turned off with a
switch on the internal processor board behind the front panel. Switch 5 is
normally set OFF, to prevent the system from sending the print line (the
factory default setting). Turn switch 5 ON to have the print line transmitted
after each cycle. The system will respond to the automation start command
(impulse) more quickly with the print line OFF because the message line will
not be compiled or transmitted in this case.