Setting bass and treble, Headphone jack, Input jack – Sound Oasis S-5000 User Manual

Page 20: Display brightness

Advertising
background image

A-18

Setting Bass and Treble

1. Press the BASS-TREBLE button and adjust the bass level with

or  or by rotating the VOLUME CONTROL button. The display

will visually indicate the bass level during adjustment.

2. Press the BASS-TREBLE button again and adjust the treble level

or  or by rotating the VOLUME CONTROL button. The display

will visually indicate the treble level during adjustment.

3. To stop adjustment of the bass and treble levels, press BASS-

TREBLE again or do not touch any buttons for four seconds. The

unit will automatically return to its previous setting.

Headphone Jack

The headphone jack accepts a 1/8” (3.5 mm) monaural or stereo type

plug. Sound from the internal speakers will turn off when this jack

is in use.

Input Jack

An Input Jack is provided so you can play music from an iPhone®,

iPod®, MP3 player or CD player through the unit’s speaker system.

While using the Input Jack, the unit’s radio, sounds and alarms will not

function. Connect your iPhone®, iPod®, MP3 player or CD player to the

Input Jack with a separately purchased cable with 1/8” (3.5 mm) jacks,

press the [STEREO] button and the display shows “AUX INPUT.”
Note: This jack is intended for use with non-amplified inputs only

(maximum of .05 W).

Display Brightness

Display brightness can be set to high, medium or low by pressing

BACKLIGHT.

Advertising