StarTech.com ST12MHDLAN - Manual (Page 5)

Instruction Manual
2
Transmitter Unit
Receiver Unit
1. F2 (Not Active)
2. F1 (Used during factory
default setting)
3. Dip Rotary Switch (Used to
pair Transmitter to Receiver)
1. F2 (Used during EDID Copy
procedure)
2. F1 (Used during factory
default setting)
3. Dip Rotary Switch (Used to
pair Transmitter to Receiver)
1. Power Jack
2. Network Status LED
3. Reset Button
4. LAN Port (RJ-45 Connector)
5. Video In
6. Link OK POWER LED
1. Power Jack
2. Network Status LED
3. Reset Button
4. LAN Port (RJ-45 Connector)
5. Video Out
6. Link OK POWER LED
NOTE: Serial 1 (Control) Ports, and Serial 2 (AUX/EXT) Ports are not active
(Additional Receiver units sold seperately ST12MHDLANRX)
1
1
1
1
3
3
4
4
5
5
2
2
6
6
2
2
3
3