StarTech.com ST121WHD - Manual (Page 7)

Instruction Manual
4
Additional Operation
IR Remote Control
Note: Before the remote control can operate, the battery protector must be
removed from the battery compartment. Your IR remote control must also be
pointed at the receiver your display is connected to in order to function.
Add Additional Video Transmitter Sources (Must have multiple transmitting units)
By default the ST121WHD’s transmitter and receiver units are paired together. If you
have more than one transmitter, you can add additional transmitters to one receiver and
switch between video sources.
1. Using the IR remote control, press MENU - > Select Add new Video Source
1
Menu – Open on screen display
(OSD) menu
2
Exit – Close OSD menu / Cancel
connection
3
Source – Switch transmitters (If
more than one is connected)
4 – Move Cursor
5 OK – Select OSD option
6 Delete – Delete a Transmitter
7 Add – Add a Transmitter
8 Guest – Power On/Off
9
Input Devices – Select
to switch between added
Transmitters