StarTech.com ST121WHD - Manual (Page 9)

Instruction Manual
6
Trouble Shooting
1. Improve Signal Quality
Environments with large amounts of 5GHz wireless traffic (such as an office), DFS1
(5150-5250 MHz -non DFS band) and DFS4 (5725-5850 MHz-non DFS band) should be
disabled by setting to ON in the Advanced Settings to yield better performance.
a. Using the IR remote control, Press MENU- > Select Advanced Settings -> DFS 1 to
change to ON. The unit will restart when completed.
b. Repeat step (a) this time selecting DFS 4 to ON. The unit will restart when
completed.
Note: OFF indicates the band is enabled. ON indicates the Band is disabled. For
reference the frequencies of each band option is listed below.
Frequency Table
DFS 1 5150-5250 MHz (non DFS band)
DFS 2 5250-5350 MHz (DFS band)
DFS 3 5470-5725 MHz (DFS band)
DFS 4 5725-5850 MHz (non DFS band)