StarTech.com IPUSB2HD2 User Manual
Page 15
Instruction Manual
12
Alternatively, devices on the USB Hub ports can be set to connect automatically, based on the
USB port they are plugged into on the HDMI video adapter (instead of based on the specific
USB device itself). This will allow for any type of USB device to be automatically connected
to the host computer, so long as it is connected to the specified physical port on the HDMI
video adapter. This option can be accessed by right-clicking on the HDMI Video adapter itself,
and going into the Server Configuration. NOTE: The software will show Port 3 and Port 4,
however enabling these ports for automatic connection will have no result.
NOTE: With both methods of automatic connection, if the USB device is manually
disconnected by the user, it will not automatically reconnect until the USB Server application
is restarted.