StarTech.com IPUSB2HD2 - Manual (Page 9)

Instruction Manual
6
7. If DHCP (automatic IP) is available on the network, no configuration should be required.
Correct network configuration Incorrect network configuration
If a DHCP server (automatic IP) is not available on your network (such as connecting
directly to the host computer), the video adapter will use a default IP address of
192.168.1.50. If this is not compatible with your network, the video adapter will need to
be manually configured.
a) If not already, connect the HDMI video adapter to a host computer directly via UTP
Ethernet cable.
b) Assign the host computer with a manual (static) IP address of 192.168.1.51. If the HDMI
video adapter will only be connected directly to this computer, no further changes need
to be made (skip to step g).
c) Run the USB Server application program. The HDMI video adapter will appear in the list.
d) Right-click on the main HDMI video adapter device. Select the “Server Configuration”
option.
e) Uncheck the “Use DHCP” option and manually enter the IP address and Subnet Mask you
wish the HDMI video adapter to use. Click “Set” when complete.