Introduction, Packaging contents, System requirements – StarTech.com WIFI2HDMCGE Manual User Manual
Page 6: Preparing your site, Packaging contents system requirements
Instruction Manual
2
Introduction
Packaging Contents
• 1x Wireless Display Adapter
• 1x Universal Power Adapter (NA/UK/EU)
• 1x USB Cable to Power Adapter Port (optional for USB Power source)
• 1x 4 position A/V cable
• 1x Software Installation Disc
• 1x Quick Installation Guide
System Requirements
• HDMI enabled display device (i.e. television, projector)
• 802.11n/g Wireless enabled video source device (i.e. Smartphone, computer)
• HDMI cable
• Available AC electrical outlet or USB power source
Preparing Your Site
1. Determine where the display will be located and place/ mount the
display appropriately.
NOTE: The maximum distance of the display adapter is limited to the distance of your
802.11n/g Wireless network device. If the wireless signal is obstructed by walls, or other
interference the signal quality and maximum distance will likely be reduced.
Ensure the Receiver Unit is situated near an available AC electrical outlet.