Initial setup – StarTech.com WIFI2HDMCGE Manual User Manual
Page 8
Advertising
Instruction Manual
4
Initial Setup
Once the WIFI2HDMC device is connected to your TV and powered on, the following
screen will show on the display.
1. Connect your Smartphone / Tablet or Notebook to the SSID of the device. By default
the SSID for the device is “WIFI2HDMC xxx” with no security key.
2. Once you have connected to the device, open your web browser and enter the
Setup IP address listed on the display which will bring up the remote control
interface. The default is http://192.168.59.254/remote
3. Select OK on the remote interface.
Advertising