Clarion TVX5653 - Manual (Page 11)

15
English
Owner
’s Man
ual
TVX5653
TV Mode Operations
Manual memory function
1) Press the joystick
# up ( w ) or down ( z ) to
select TV1 or TV2.
2) Press the joystick # to the left ( Å ) or right
( Î ) to select the channel to be preset.
3) Hold down for about 2 seconds the preset
channel button ( 4 to 9 ) in which the station
is to be stored. The new channel now being
received is stored in the memory.
* Upon completion of the memory operation, the
channel display at the top left of the screen
turns red.
Note:
• The memory contents are returned to the
default settings when the battery is replaced or
the power supply is otherwise suspended.
Preset scanning
1) Press the SHIFT button 3 to display the
menu screen.
Checking out the channels
1) Press the CH (channel) button 0 .
The channel currently being received will be
displayed for about 5 seconds, together with
the number of the preset button and the
screen display mode.
Permanently displaying the channel
1) Press the SHIFT button 3 to display the
menu screen.
* The menu screen remains displayed for about
5 seconds.
* Perform the next operation while the menu
screen is displayed.
2) Press the DISP (display) button 4 .
The current channel is now permanently dis-
played on the screen.
* The menu screen’s “DISP” indicator will
change to red.
Note:
• When the “channel non-permanent display
mode” has been set, the reception channel is
displayed for about 5 seconds when the TV
band is changed and when tuning.
3) To clear the channel display, first display the
menu screen again, and then press the DISP
(display) button
4 .
* The menu screen’s “DISP” indicator will
change to white.
Selecting the FM modulator fre-
quency
• The FM modulator frequency can be set only in
the TV mode.
• The factory setting is 88.3 MHz.
1) Press the TV/CD button 2 to select the TV
mode.
2) Press the SHIFT button 3 to display the
menu screen.
* The menu screen remains displayed for about
5 seconds.
* Perform the next operation while the menu
screen is displayed.
2) Press the PS (preset scan) button 5 .
The stations stored in the preset channels are
received in sequence at intervals of about 5
seconds per station.
3) To release the preset scanning, display the
menu screen, and press the PS button 5 .
Preset selection
1) Press the joystick # up ( w ) or down ( z ) to
select TV1 or TV2.
2) Press one of the preset channel buttons ( 4
to 9 ).
The station in the channel which is stored in
the memory is now tuned in.
* The menu screen remains displayed for about
5 seconds.
* Perform the next operation while the menu
screen is displayed.