16 english, Tv mode operations, Adjusting the brightness and tone of color – Clarion TVX5653 User Manual
Page 12: How to connect the unit with a vtr, Watching a video tape
16
English
Owner
’s Man
ual
TVX5653
TV Mode Operations
3) Press either the FM modulator frequency 1
button
9
or the FM modulator frequency 2
button
8
.
*
The FM modulator frequency is set as follows:
•
FM modulator (FRQ1): 88.3 MHz
•
FM modulator (FRQ2): 88.7 MHz
Adjusting the brightness and tone
of color
1) Hold down the center of the joystick
#
for
about 2 seconds.
The screen adjustment mode now appears.
*
Start the adjustments while the adjustment dis-
plays are on the screen. These displays will be
automatically cleared after about 5 seconds.
2) Press the joystick
#
up (
w
) or down (
z
) to
select what is to be adjusted, and then press
it to the left (
Å
) or right (
Î
) to make the
adjustment.
*
The pointer which indicates the adjustment
position moves one scale increment when ini-
tially pushed once. It then moves one scale
increment when it is pushed 5 times.
Note:
•
There is no hue adjustment for the PAL TV sys-
tem.
How to connect the unit with a VTR
Notes:
•
Before proceeding with the connections, make
absolutely sure that the power of the unit and
VTR (or video camera) has been turned off.
•
Before proceeding with the connections, refer
to the Instruction Manual of the unit which is to
be connected.
Note:
•
You will need an AV connecting cord (CCA-
357-500) purchased separately to convert the
RCA pin cord into a stereo mini jack in order to
connect an integrated camera/VTR unit to the
unit.
Watching a video tape
Refer to the Instruction Manual of the unit con-
cerned for details on operating the video unit
connected.
1) Press the TV/CD button
2
to select the TV
mode.
2) Press the joystick
#
up (
w
) or down (
z
) to
select VTR.
Each time the joystick
#
is pressed up (
w
)
or down (
z
), the setting is switched in the
sequence shown below.
Note:
•
When a VTR has been connected to the sys-
tem expansion terminals on the unit’s rear
panel, the setting is switched in the sequence
shown below.
TV1
VTR
TV2
TV1
VTR1
TV2
VTR2
Brightness adjustment
(BRIGHT)
Hue adjustment (HUE)
Darker
Lighter
More
reddish
More
greenish
Color intensity
adjustment (COLOR)
Lighter
Darker
Audio output ternimal
Video output ternimal
VTR input
ternimal