StarTech.com RKCOND17HDGB - Manual (Page 9)

Instruction Manual
6
Operation
1. Once all cables are securely connected and all mounting screws are properly
tightened, loosen the thumbscrews on the front of the console.
2. Grasp the Top Handle and pull the console outward and then lift upward to open.
3. Turn the Power Switch on the front of the console to the On position, and power on
the connected Server or KVM switch.
NOTE: There is also a soft Power On/Off button located with the menu controls
below the LCD panel. If the display does not turn on automatically, press the power
button
4. Use the OSD controls to adjust the image as necessary – see the Front Panel
Controls section above for instruction.