StarTech.com CAB1631D1U - Manual (Page 10)

Instruction Manual
7
Audio Stick
An optional multimedia module can be LINKed to the back of each StarView for
selecting microphone and stereo speaker signals. There are two options for Audio
Stick: On and Off. When set to On, audio selection follows computer selection.
When set to Off, audio selection stops following computer selection. Off mode is
useful if you want to listen to a particular computer’s audio signal while operating
other computers. The non-volatile memory stores the Audio Stick setting.
Scan Type
Ready PC + Eye: In Scan mode, scans through only power-on and eye-marked
selected computers.
Ready PC: In Scan mode, scans through all power-on computers.
Eye only: In Scan mode, scans through any Eye-selected computer regardless of
power status.
The non-volatile memory stores the Scan Type setting.
Scan Rate
Sets the duration of a computer displayed in Auto Scan Mode. The options are 3
seconds, 8 seconds, 15 seconds and 30 seconds. The non volatile memory stores
the Scan Rate setting.
Keyboard Speed
StarTech.com offers a keyboard typematic setting that overrides the typematic
settings in the BIOS and Windows operating system. Available speed options are
Low, Middle, Fast and Faster as 10, 15, 20 and 30 characters/sec respectively. The
non-volatile memory stores the Keyboard Speed setting.
Hotkey Menu
When you hit the left <CTRL> key twice within two seconds, the Hotkey Menu
appears displaying a list of hot-key commands if the option is On. The Hotkey
Menu can be turned Off if you prefer not to see it when the left <CTRL> key is hit
twice. The non-volatile memory stores the Hotkey Menu setting.
CH Display
Auto Off: After you select a computer, the channel address and name of the
computer will appear on the screen for 3 seconds then disappear automatically.
Always On: The channel address and name of a selected computer and/or OSD
status displayed on the screen all the time. The non-volatile memory stores the
CH Display setting.