Cabletron Systems FOT-F3 - Manual (Page 16)

Page 2 - 3
REQUIREMENTS/SPECS.
2.1.2 AUI Requirements
• The AUI cable connecting the transceiver to a device
must be Ethernet Version 1, Version 2, and/or IEEE
802.3 type cables that match the type of device being
attached to the AUI port.
• The AUI cable must not exceed 50 meters (164 feet)
in length. If 28 AWG AUI cable is used, then the
maximum cable length is limited to 16 meters
(50 feet).
2.2 OPERATING SPECIFICATIONS
This section contains the specifications, power supply
requirements and environmental guidelines for Cabletron
Systems’ FOT-F3. Cabletron Systems reserves the right
to change these specifications at any time without notice.