SunBriteTV SB-CM32A12 - Manual (Page 9)

Installation Instructions SB-CM32A12
9
Figure 10
3. Install two removed screws through lower mounting holes in
display mounting plate and into display back. (See Figure
11)
Figure 11
4. Tighten all hardware.
5. Route cables and wires to display.
Adjustments
To adjust display Roll, Pitch, and YAW tension:
1. Disconnect all wires and cable from the display.
2. Remove two Lower screws securing display to Centris cup.
3. Loosen two Upper screws securing display.
4. Lift display upward and away from mount.
5. Using a hex head wrench turn the tension adjustment screw
clockwise to increase tension, or counter-clockwise to
decrease tension. (See Figure 12)
6. Re-install display.
Figure 12
2
2
(P)
3 x 2