Superlux UT64/248 - Manual (Page 15)

Page. 13
single channel receiver
7.2.3 FREQ: Displaying frequency in use
single channel receiver
MENU G/CH SCAN MENU
save
&
exit
D: Channel setting
a. Press MENU to select G/CH functon. Press SCAN ▼ key once, CHANNEL double
digit flashes indicating ready for setting.
b. Pressing SCAN ▼ again, receiver start to scan channels and stop at the first avail-
able channel. If all channels in the group are taken and the receiver keep on scan-
ning, user shall go the another group. Pressing SCAN once or holding, receiver will
keep on scanning until SCAN key released. To stop double digit flashing and confirm
channel setting, press MENU again to complete.
C: CHANNEL setting steps:
A, Steps:
B, Operations:
a. Press MENU to select FREQ.
b. This function only display frequency, and user cannot change the frequency.
MENU FREQ
UT6_UM.indd 13 2009/5/7 �� 04:20:36