Single channel receiver – Superlux UT64/248 User Manual
Page 8
Page. 6
single channel receiver
4. Receiver Connections
4.1 Connect both antenna to rear panel socket
⑥
and
⑪
as illustration 3.
4.2 Connect power adapter output to receiver
⑩
and plug into power line (Caution:
check power source specification, make sure the power adapter matches the
source spec.
4.3 Audio connections:
4.3.1 Level switch
⑧
, when un-balanced output socket is connected to mixers or
amplifiers’ line level input, switch the output level to “LINE” position. When
connected to mixers or amplifiers’ mic level input, switch the output level
to “MIC” position. Mis-match level setting, will result distortion or high
noise. When used with guitar, keep the level at “LINE” position.
Illustration 3
single channel receiver
UT6_UM.indd 6
2009/5/7 �� 04:20:35