Assembly – Sure Heat 2006 Amana AM30 User Manual

Page 10

Advertising
background image

Fig. 22

Fig. 23

Fig. 24

7. Using the four (4) long self tapping screws, install

the door catch magnets to the bottom of the front
grill flange. Start one screw and then the other
before tightening. Make sure to install the screws
at a slight angle as shown. (See Fig. 21)

8. Place left hand door on an angle over the left side

door pivot. (See Fig. 22)

9. Tilt the top of the door toward the grill, while

depressing the top door pivot pin above the door
edge. (See Fig. 23)

10. Move the door slightly until the pin locks into place

in the hole on top of the door. (See Fig. 24)

11. Repeat steps 8-10 for right door installation.

Fig. 21

Assembly

8

Install Screws At

An Angle

Advertising