Sure Heat 2006 Amana AM30 - Manual (Page 12)

SIDE BURNER ASSEMBLY
1. Lay the side burner on its side with the shelf hooks
pointing up. Slide the valve assembly through the
center hole in the front of the shelf. Make sure the
flared fitting on the valve is facing toward the bottom
of the shelf. (See Fig. 31)
2. Insert one valve screw through the bezel and in to
the side burner valve and tighten. Make sure the
bezel is installed correctly with the H facing the
igniter hole. (See Fig. 32)
3. Insert the second valve screw through the bezel and
into the side burner valve. Tighten both screws
securely. (See Fig. 32)
4. Press the side burner assembly into the side burner
tray and install two (2) self tapping screws.
(See Fig. 33-34)
Fig. 32
Fig. 33
Fig. 34
Assembly
10
Fig. 31
Flared Fitting
“H” On Bezel
Facing Igniter
Hole