Sure Heat Altima 30, 38, 48 - Manual (Page 9)

INSTALLATION / ASSEMBLY
7
AGR38PF Ignitor Assembly
AGR48PF Ignitor Assembly
Side Shelves Attachment
1. Loosen the bolts on the side of the grill and
attach the shelves by allowing the bolt heads
to fall through the large opening in the bottom
of the keyhole slots. Then slide the
shelves downward until the
bolts are resting against the top of
the key hole slots. Tighten all of
the shelf bolts. (See Fig. 8)
2. Attach the wires coming out from the sides of
the grill to the ignitor terminals. (See Fig. 9)
Note: It does not matter which wire goes to which
terminal on the double wire ignitor
Left Shelf (Double Wire)
Left Shelf (Double Wire) Right Shelf (Double Wire)
Right Shelf (Single Wire)
Fig. 8
Fig. 9