Accessory burners lighting, Using the grill light – Sure Heat 2008 Four Seasons FSIS User Manual

Page 13

Advertising
background image

Accessory Burners Lighting

ROTISSERIE LIGHTING

Open the lid. Push and turn the control knob for the rotisserie counter-clockwise to the “HIGH”
position.
Continue pushing on the knob and you’ll hear a snapping sound. If the burner does not light in 4
seconds, turn the control knob to "OFF" and wait 5 minutes before trying again. Once lit, turn the
control knob to the desired setting.

If the igniter does not function, the burner can be lit by holding a lit match to the burner while the
control knob is turned counter-clockwise to “HIGH”.

NOTE: After the first use the stainless steel around the burner will darken. This is a normal

reaction of premium stainless steel due to heat and is not a defect. The infrared panel will
also darken after initial use. This is also a normal occurrence.

NOTE: Do not operate the main burners and infrared back burner at the same time.
This can cause warping of the roll top grill hood.

!

13

SIDE BURNER LIGHTING

Push and turn the control knob to the “HIGH” position. Continue pushing on the knob and you
will hear a snapping sound. It may be necessary to hold the electronic starter button for about 4
seconds. If the burner does not light in 4 seconds, turn the knob to the “OFF” position and wait 5
minutes before trying again.

MATCH LIGHTING

If by chance the electronic igniter does not light the burner, the burner may be lit with a match. Attach
the match to the match extender, located inside the right cart door.

Keep your face as far away from the grill surface as possible and hold a match, attached to the
match extender, near the burner ports, then push and turn the control knob counter-clockwise to the
“HIGH” position.

Using the Grill Light

!

WARNING

Always unplug light cord when not in use.

!

WARNING

Do Not use grill light in the rain.

Advertising