SUUNTO QUEST User Manual
Page 40

every 1 km (mile) for running, every 0.5 km (mile) for walking, and every 10 km
(miles) for cycling.
You can also take manual laps during training. When training, tap on the display
to take a lap.
You can adjust the tapping sensitivity in the general settings:
1. In the time mode, keep
NEXT
pressed to enter the settings.
2. Scroll to general settings with
START STOP
and confirm with
NEXT
.
3. Press
NEXT
to enter the tap sensitivity settings.
4. Press
START STOP
to adjust the tap sensitivity to the desired level – you can
tap the display when scrolling through the levels to check the sensitivity
level. When a tap is registered, tapped! message will be displayed.
5. Press
NEXT
to confirm the setting.
6. Keep
NEXT
pressed to exit the settings and return to the time mode.
TIP: Laps will be automatically created when using interval timers and when
a training session is paused or stopped.
40