Vermont Casting RHEDV25 - Manual (Page 27)

27 10000801
Vermont Castings, Majestic Products RHEDV Direct Vent Insert
Trim Top
Channel
Trim
Side
Channel
Trim
Framing
Inner Sides
Screw
Trim
Side
Channel
Deflector
Trim Top
FP1262
Fig. 41 RHESSD and RHESLD trim assembly.
A flat louvre kit OR a bay window kit need
to be chosen to complete the installation.
Frame Mounting
General Information
The Decorative Front Frame should be installed last
after all other work, such as gas connections, venting,
etc., has been completed and thoroughly checked and
tested for operation, leaks and proper installations
requirements.
Fit decorative frame to the fireplace and fasten. (Fig. 41)
Screws
Front View FP1263
Fig. 41 Frame mounting.
Plastic on the trim must be removed
before mounting onto the fireplace.
Glass must be tightly pressed against the
front of the frame in order to prevent
screws from damaging glass edges.