CDA DC730 - Manual (Page 12)

12
Electronic Programmer
(Lower Main Oven only)
The electronic programmer is a device that groups together the following
functions:
– 24 hour clock with illuminated display
– Timer (up to 23 hours and 59 minutes)
– Programme for automatic oven cooking
– Programme for semi-automatic oven cooking.
A
Description of the Buttons:
Symbols Description
Timer
Cooking time
End of cooking time
simultaneously: Switching to
manual and program reset.
To increase the numbers on the
digital display
To decrease the numbers on the
digital display.
Description of the Illuminated Symbols:
Symbols Description
A
flashing
Programmer in automatic
position but not programmed.
A
always lit
Programmer in automatic
position with program set.
Automatic cooking taking place.
Timer in operation
and
A
flashing
Program error.
(The time of day lies between the
calculated cooking start and end
time).
Note:
Select a function by the respective button and, in 5 seconds, set the required time with the
/ buttons
(“one-hand” operation).
After a power cut the display resets to zero and cancels the set programs.
Caution: If the electricity supply is cut off (the display numbers will flash), the clock will reset
and all the programs entered will be cancelled.
Fig. 6