CDA DC730 User Manual
Page 25
25
To Build in the Double Oven
• The appliance should be installed by a QUALIFIED INSTALLATION TECHNICIAN.
The appliance must be installed in compliance with regulations in force.
The built under double oven shall be fitted under the working surface into a kitchen base unit (width and
depth 60 cm) but you must ensure that it is properly ventilated.
Installation requires a compartment as illustrated and described in next chapters:
•
Installation "A" between Existing Side Cabinets (560 or 600 mm GAP) (figs. 32, 33, 34, 36)
•
Installation "B" between Side Cabinets by Removing Provious Housing (figs. 35, 36)
•
Installation "C" by Using Housing Unit (figs. 37, 38, 39)
CAUTION: Do not lift the double oven by the door handles.
WARNING !
– We would point out that the adhesive which bonds the plastic laminate to the furniture must withstand
temperatures not less than 150° C to avoid delamination.
– The appliance must be housed in heat resistant units.
– The walls of the units must be capable of resisting temperatures of 75° C above room temperature.