Swimline IB series Boat - Manual (Page 5)

5
4. Please see the Safety Valve Diagram #1. Inflation: Unscrew the valve cap (A1). Attach the air
pump hose nozzle and twist to lock the hose to the valve. As each chamber is inflated detach the
hose and screw in the valve cap (A2).
5. Deflation: Remove the Valve Cap (A1) push down the Deflation Button (B) and turn the valve
clockwise by 90 degrees until it is locked. Release the valve and the air will flow out. If you
want to stop deflation push down the Deflation Button (B) and turn it counter-clockwise by 90
degrees. The deflation will stop when the valve pops up. To fully deflate the boat for storage,
use the deflation feature on your pump (inflator).
Operating Instructions
Preparation before departing:
1. Acquire necessary information and inform other passengers:
A. Get information on local laws, regulation and hazards related to water activities and boat
operation.
B. Check weather forecast, local currents, tides and wind conditions.
C. Advise someone on land of the time you plan to be back
D. Explain basic boat operation to all passengers.
E. Be sure that at least one of your passengers can operated the boat in case of emergency.
F. Learn how to determine the distance you can cover, and remember that bad weather
conditions can alter this.
2. Check the working condition of the boat and equipment:
A. Check inflation pressure.
B. Inspect all safety valves.
C. Check the load is evenly distributed on deck of boat; bow to stern and side to side.
D. Only motor powered lower than the number of the table is recommended for this boat.
3. Check that required safety equipment is on board (check the laws and regulations of the country
or locality in which you are boating):
A. One personal floatation device (PFD) for each passenger.
B. The air pump, oars, & repair kit.
C. The boat papers and your boating license (if applicable).
D. Lights are required if operating after dark.
Disassembly
1. Remove all accessories (seats, oars, motor mount, etc.).
2. Clean and dry the boat as previously instructed.
3. Open all valves and deflate boat completely.
4. Fold the boat. Fold port and starboard sides in towards middle. Fold the boat from stern to bow.
5. Place boat and all accessories in carry bag for storage.