Switch3 tab overview, Switch 1 function, Switch 2 function – TC-Helicon VoiceLive Rack Full User's Manual User Manual
Page 49: Switch 3 function, Global, The setup menu: switch3, The setup button
48
SWITCH3 Tab Overview
This edit tab allows you to globally set the target
for each of the 3 switches on the TC-Helicon
Switch3 footswitch.
f SWITCH 1 FUNCTION
• OFF
• BYPASS
• STEP UP
• STEP DOWN
• PRESET UP
• PRESET DOWN
• HARMONY
• DELAY
• HARDTUNE
• TRANSDUCER
• REVERB
• UMOD
• DOUBLE
• RHYTHMIC
• HARMONY HOLD*
• CHOIR
• PITCH
• GUITAR FX
• SET KEY
f SWITCH 2 FUNCTION
Same as above.
f SWITCH 3 FUNCTION
Same as above.
* Harmony Hold is a feature that sustains the last
harmony syllable indefinitely as you hold the Mic-
Control button.
f GLOBAL
Turns global assignment of the footswitches on
or off. When it’s set to ON, the footswitches
will control the same three targets regardless of
which preset is loaded. When set to OFF, each
preset can have its own assignments. Global as-
signment of the SWITCH3 target is best used
when controlling PRESET UP/DOWN, STEP UP/
DOWN and BYPASS.
The Setup Button