Routing – TC-Helicon VoicePrismPlus Manual User Manual

Page 21

Advertising

ROUTING

is a new menu, with four parameters to control

audio processing and path..

DIGITAL SOURCE

: may be set to

SPDIF

for a digital signal on the

S/PDIF jacks, or

AES

EBU

to select input from the AES/EBU

jacks on the back of the expansion card.

LEAD INPUT

: to use your analog line in on the

back panel, or the Mic preamp on the front

of your VoicePrism Plus, set the

LEAD INPUT

ANALOG

. To use the microphone input, the

MIC ON

button must be selected, as well as

the

48V

button if you require phantom power for your mic.

The

MIC ON

button must be

OFF

to use

LINE

input from the

back of the unit.

AUX INPUT

: you can now accept a digital input from the left or

right channels of the card, or from the auxiliary input jack on

the back panel. These inputs are then sent to the effects sec-

tion of the VoiceCraft card. To avoid digital signal conflicts,

you are prevented from selecting the same

AUX INPUT

channel

as the digital

LEAD INPUT

channel.

PROCESS DELAY

: whenever Voice Modeling is activated, a cer-

tain amount of time is required to analyze and modify the

output signal. The VoicePrism Plus requires 20 ms of time for

optimal performance. Increasing

PROCESS DELAY

enables the

VoicePrism Plus to do a more concentrated signal analysis for

greater accuracy. As some vocalists in a live situation may

feel uncomfortable about hearing a delay, you can reduce

the amount of processing time, being aware that the quality

of the modeled voice is reduced at lower settings.

VoicePrism Plus User Manual

Utility Button

Advertising