TC-Helicon VoicePrismPlus Manual - Manual (Page 7)

PRESET SCREEN
You will notice a slight change in the preset screen from the
original VoicePrism. On the original VoicePrism, if you incor-
porated the Thickening effect on the lead voice, a block
marked
TH
would appear in the signal path diagram after the
lead voice block. With VoicePrism Plus, when you incorpo-
rate Voice Modeling (VM) in your preset, this block appears
as
VM
, as Voice Modeling is used to create a Thickening
effect. For details on VM, refer to the VOCALS button section.
The original VoicePrism manual illustrated how you can
assign the softknobs in the
PRESET
screen to control different
parameters -- you can now access new libraries using these
same controls. The new parameters that can be assigned to
the softknobs are:
VM LIB
: Selecting a
VM LIB
will automatically set the style and
amount of each of the VM effects to a predetermined setting
(designed by TC-Helicon), creating pleasing results that you
can quickly recall and implement in any of your presets. The
Thickening effect, a parameter in the original VoicePrism, can
be replicated using the controls on the
LEAD
menu page
under the VOCALS button on the VoicePrism Plus. In the
LEAD
menu you can set the Detune amount of the Voice
Modeled (VM) voice and set the ratio between the dry and
VM voice with the
DRY
:
VM MIX
softknob. Pitch differences
between the two voices, along with the Pan settings, enables
the creation of a more configurable Thickening effect.
% 7 %
Preset Screen VoicePrism Plus User Manual