TC-Helicon VoiceLive Manual - Manual (Page 9)

7
FRONT PANEL
FOOTSWITCH BUTTONS
These allow control of VoiceLive in performance. These
buttons are multifunctional depending on the operating mode
of the unit.
The best place to get an understanding of how these work is
the Performance Mode Step Through Orientation in the
Quickstart section of the manual. For a detailed reference of
the operation of the footswitches in the various modes, see
the Footswitch Function Tables near the end of the manual.
PREVIOUS USER HARMONY MUTE
HOLD FOR BYPASS
NEXT
PRESET SONG VOICE
SONG
PRESET
Direct A / Voice 1
SELECT
SELECT
Direct B / Voice 2
STEP
KEY
REWIND
SCALE
Direct D / Voice 4
HOLD FOR MODE HOLD FOR SUBMODE
SONG
DIRECT
Direct C / Voice 3
1 2 3 4
5 6 7 8
Please note that the footswitch buttons have multiple
functions. To ensure clarity in this manual they will often
be referred to as switches 1 through 8 as numbered
above.
PUSH TO ENTER
EDIT KEY
Enters and exits edit modes.
STORE KEY
Press STORE to begin the store
process. Presets, Songs and
IO/Utility parameters may be
stored using this key. Each Preset
and Song name/number store
destination may be changed after
the first press. Pressing the
STORE key a second time will
complete the store operation.
DATA WHEEL
This control is used to select
presets in preset mode, songs in
Song mode and edit screens in
edit mode. With the Store
Operation this is used to select
whether to store Preset, Song or
IO/Util parameters. Parameters
surrounded by triangular brackets
(eg. <STEP INS> ) may be
changed using the DATA WHEEL.
PUSH WHEEL TO ENTER
Pressing the DATA WHEEL
activates special functions in the
Preset edit and Song edit
modes. Parameters surrounded
by triangular brackets (eg.
<Execute> MIDI-Dump) perform
their actions when ENTER is
pressed.