TeeJet 500 SLURRY COMPUTER - Manual (Page 18)

I NFO MENU T EE J ET 500 S LURRY COMPUTER OPERATORS MANUAL
18
INFO MENU
The info. menu displays the following information (use the arrow up/down keys to
page):
Doserate:
The required application rate. The displayed rate will either be the rate that has
been encoded or the target rate if the TeeJet 500 Slurry computer is receiving
rates via a serial link.
PTO:
The tractors PTO speed shown as revolutions per minute.
Rpm distributor:
The distributors speed shown as revolutions per minute.
Rpm pump:
The slurry spreaders pump speed shown as revolutions per minute.
Ton (or M 3
)/min:
Ton (or M 3 ) per minute through the flow meter.
Must not be confused with pump capacity.
Time:
The trip time since the start of the task or since the last reset (see page 21).
Ha/hour:
The present work efficiency. How large an area is being worked with the present
speed and the present working width.
Trip counter:
The number of the active trip counter set or trip counter name (if encoded)